(Page 2 of 81 in this chapter) Version
AutoStart
Syntax
- AutoStart = setting
Access
- Read/Write
Type
- String
Default
- NO
Allowed Values
- YES | NO
Example
- AutoStart = NO
Description
- Specifies whether the board automatically starts when ctdaemon is started or the board is Hot Swap inserted.
- The Supervisor-level keyword AutoStartEnabled enables or disables the autostart feature. If AutoStartEnabled is set to YES, when ctdaemon is started the Supervisor starts each board whose AutoStart keyword is set to YES. If AutoStartEnabled is set to NO, no boards are started automatically, regardless of the setting of the AutoStart keyword.
- For more information, refer to the OAM System User's Manual.
See Also
- AutoStop
(Page 2 of 81 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.