(Page 6 of 81 in this chapter) Version
Buffers[x].Num
Syntax
- Buffers[x].Num = buffercount
- x = 0 - 2
Access
- Read/Write
Type
- Integer
Default
Allowed Values
- Based on the available board memory.
Example
- Buffers[0].Num = 64
Description
- Buffers[0].Num specifies the number of buffers available for play and record. By default, two buffers are allocated per channel. For simultaneous play and record, you must configure four buffers per channel.
- Buffers[1].Num is for ISDN. Buffers[2].Num is required for NMS Fusion systems.
See Also
- Buffers[x].Size
(Page 6 of 81 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.