(Page 8 of 81 in this chapter) Version
CallSetupPorts
Syntax
- CallSetupPorts = level
Access
- Read/Write
Type
- Integer
Default
- The default setting for CallSetupPorts depends upon the CCMode setting:
Allowed Values
- 60 | 40 | 20
Example
- CallSetupPorts = 60
Description
- Specifies the specific maximum level of call control DSP resources allocated for Channel Associated Signaling (CAS) protocols running on the board.
- The CallSetupPorts value overrides the CCMode value.
See Also
- CCMode, DSP.C5x[x].CallSetupPool
(Page 8 of 81 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.