(Page 9 of 81 in this chapter)
Version
CCMode
Syntax
CCMode =
setting
Access
Read/Write
Type
String
Default
AG Quad =
MEDIUM
AG Dual =
NONE
Allowed Values
HIGH | MEDIUM | LOW | NONE
Example
CCMode = LOW
Description
Specifies the level of call control DSP resources allocated for Channel Associated Signaling (CAS) protocols running on the board.
Valid options are:
Options
Description
HIGH
Allocates DSP resources for approximately 50% of the ports to run call control.
MEDIUM
Allocates DSP resources for approximately 25% of the ports to run call control.
LOW
Allocates DSP resources for approximately 10% of the ports to run call control.
NONE
Call control resource management is not required. Used when running the NOCC protocol on the board. This is the only valid value for AG Dual variant boards.
CCMode
is valid for AG Quad boards with at least one trunk configured to run CAS protocols (
NetworkInterface.T1E[x].SignalingType = CAS
).
For more information, refer to
Section 1.4,
DSP Resource Allocation
.
See Also
CallSetupPorts
,
DSP.C5x[x].CallSetupPool
,
NetworkInterface.T1E1[x].SignalingType
(Page 9 of 81 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.
(Page 9 of 81 in this chapter) Version (Page 9 of 81 in this chapter) Version