(Page 12 of 80 in this chapter) Version
Clocking.HBus.FallBackClockSource
- For information about setting up CT bus clocking, and rules and restrictions for configuring CT bus clocking, refer to Section 3.5, Configuring Board Clocking.
Syntax
- Clocking.HBus.FallBackClockSource = clock_source
Access
- Read/Write
Type
- String
Default
- OSC
Allowed Values
- OSC | A_CLOCK | B_CLOCK | NETREF | NETREF2 | NETWORK
Example
- Clocking.HBus.FallBackClockSource = OSC
Description
- Specifies the alternate clock reference to use when the master clock does not function properly.
- When this keyword is set to NETWORK, you must also specify the alternative network clocking source with the Clocking.HBus.FallBackNetwork keyword.
Note: If the Clocking.HBus.AutoFallBack keyword is set to NO, this keyword is ignored.
- For more information about clock fallback, refer to the Switching Service Developer's Reference Manual.
Note: If you want to support clock fallback on an AG board, refer to the NMS web site (www.nmss.com) for more information.
See Also
- Clocking.HBus.AutoFallBack
, Clocking.HBus.FallBackNetwork
(Page 12 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.