(Page 16 of 80 in this chapter) Version
Clocking.HBus.NetRef2Speed
- For information about setting up CT bus clocking, and rules and restrictions for configuring CT bus clocking, refer to Section 3.5, Configuring Board Clocking.
Syntax
- Clocking.HBus.NetRef2Speed = speed
Access
- Read/Write
Type
- String
Default
- 8K
Allowed Values
- 8K
Example
- Clocking.HBus.NetRef2Speed = 8K
Description
- Speed of the NETREF2 timing signal on the CT bus.
See Also
- Clocking.HBus.NetRef2Source
, Clocking.HBus.NetRef2SourceNetwork
(Page 16 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.