(Page 57 of 80 in this chapter) Version
NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk
Syntax
- NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk = setting
- x = 0 | 1 | 2 | 3
Access
- Read/Write
Type
- Integer
Default
- -1 (no backup D channel)
Allowed Values
- 0 | 1 | 2 | 3
Example
- NetworkInterface.T1E1[0].ISDN.D_Channel_Backup_Trunk = 2
Description
- The trunk of the backup D Channel for this NFAS group. Must be a different trunk on the same board as the primary D Channel interface and must be part of the same NFAS group.
- This keyword is programmed only on the trunk when NetworkInterface.T1E1[x].D_Channel = ISDN.
- For more information about NFAS groups, refer to the AG ISDN Installation Manual.
See Also
- NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].ISDN.NFAS_ Member.Count, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Board, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].NAI, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Trunk, NetworkInterface.T1E1[x].ISDN.NFASGroup
(Page 57 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.