(Page 59 of 80 in this chapter) Version
NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Board
Syntax
- NetworkInterface.T1E1[x].ISDN.NFAS_MEMBER[y].Board = setting
- x = 0 | 1 | 2 | 3
- y = NFAS group member index
Access
- Read/Write
Type
- String
Default
- For every member of an NFAS group, this keyword must be set in the configuration file of the board where the D Channel resides.
Allowed Values
- Any board number as established in oamsys.cfg.
Example
- NetworkInterface.T1E1[0..3].ISDN.NFAS_MEMBER[y].Board = 0
Description
- The board number (as defined in oamsys.cfg) on which this NFAS member resides. This board number must match the board number specified in the OAM configuration file oamsys.cfg. For more information about oamsys.cfg, refer to the OAM System User's Manual.
- This keyword is valid only on the trunk where NetworkInterface.T1E1[x].D_Channel = ISDN.
- For more information about NFAS groups, refer to the AG ISDN Installation Manual.
See Also
- NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].NAI, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Trunk, NetworkInterface.T1E1[x].ISDN.NFASGroup
(Page 59 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.