(Page 61 of 80 in this chapter) Version
NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Trunk
Syntax
- NetworkInterface.T1E1[x].ISDN.NFAS_MEMBER[y].Trunk = trunk
- x = 0 | 1 | 2 | 3
- y = NFAS group member index
Access
- Read/Write
Type
- Integer
Default
- For every member of an NFAS group, this keyword must be set in the configuration file of the board where the D Channel resides.
Allowed Values
- 0 - 3
Example
- NetworkInterface.T1E1[0].ISDN.NFAS_MEMBER[1].Trunk = 0
Description
- Specifies the trunk number (as defined in oamsys.cfg) bearing the primary D channel for this NFAS member.
- This keyword is valid only on the trunk where NetworkInterface.T1E1[x].D_Channel = ISDN.
- For more information about NFAS groups, refer to the AG ISDN Installation Manual.
See Also
- NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Board, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].NAI, NetworkInterface.T1E1[x].ISDN.NFASGroup
(Page 61 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.