(Page 74 of 80 in this chapter)
Version
SwitchConnectMode
Syntax
SwitchConnectMode =
setting
Access
Read/Write
Type
String
Default
AllDirect
Allowed Values
ByChannel | AllDirect | AllConstantDelay
Example
SwitchConnectMode = AllConstantDelay
Description
Specifies the HMIC switch
CONNECT
mode.
Option
Description
ByChannel
The mode for each board connection depends on whether the connection is made using
swiMakeConnection
or
swiMakeFramedConnection
.
AllDirect
For all board connections, data is transferred directly from the source timeslot to the destination timeslot. For forward connections, (from lower-numbered timeslots to higher-numbered timeslots), data is transferred in the same time frame. For backward connections (from higher-numbered timeslots to lower-numbered timeslots), data is transferred in the next frame.
AllConstantDelay
Data is delayed so that the destination timeslot is always in the next frame regardless of whether it is a forward connection.
This keyword is used for configurations that transfer non-voice data in multiple timeslots (for example, HDLC in TDM).
For more information, refer to
swiMakeConnection
and
swiMakeFramedConnection
in the
Switching Service Developer's Reference Manual
.
See Also
SwitchConnections
,
SwitchDriver.Name
(Page 74 of 80 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights reserved.
(Page 74 of 80 in this chapter) Version (Page 74 of 80 in this chapter) Version