(Page 76 of 80 in this chapter) Version
TCPFiles[x]
Syntax
- TCPFiles[x] = filename
- x = the number of the TCP file.
Access
- Read/Write
Type
- String
Default
- None.
Allowed Values
- filename
Description
- Specifies a trunk control program for the current board(s). Trunk control programs perform all signaling tasks necessary to interface with the telephony protocol used on the line or trunk. TCPs are loaded onto an NMS board during initialization. After a TCP is loaded, applications must start the protocol before they can use the TCP to perform call control on specific ports.
- For more information about starting protocols on NMS boards, refer to the ADI Service Developer's Manual. For more information about loading and running TCP files, refer to the AG CAS for Natural Call Control Developer's Manual or to the AG ISDN for Natural Call Control Developer's Manual.
Note: The TCPFiles[x] keyword is required for configurations that run CAS signaling protocols.
Example
- TCPFiles[0] = nocc.tcp
(Page 76 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.