(Page 79 of 80 in this chapter) Version
VoiceIdleCode
Syntax
- VoiceIdleCode = voice_idlecode
Access
- Read/Write
Type
- Integer
Default
- If Xlaw = MU-LAW, default = 0x7f.
- If Xlaw = A-LAW, default = 0xd5.
Allowed Values
- 0x00 - 0xFF
Example
- VoiceIdleCode = 0xd5
Description
- Sets the voice bit pattern transmitted by an idle DSP or to an unconnected line interface.
- In general, a DSP is considered to be idle when no application is using it.
See Also
- SignalIdleCode, Xlaw
(Page 79 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.