(Page 20 of 80 in this chapter) Version
Clocking.HBus.Segment
Syntax
- Clocking.HBus.Segment = number
Access
- Read/Write
Type
- Integer
Default
- 1
Allowed Values
- Non-zero integer
Example
- Clocking.HBus.Segment = 1
Description
- Specifies the CT bus segment into which the board is connected.
Note: In most cases, the chassis contains only one segment.
(Page 20 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.