(Page 52 of 80 in this chapter) Version
MaxChannels
Syntax
- MaxChannels = numChannels
Access
- Read/Write
Type
- Integer
Default
- 124
Allowed Values
- 1 - 255
Example
- MaxChannels = 128
Description
- Specifies the maximum number of channels to allocate on the board. The number of channels affects memory requirements. If Buffers[0].Num is not configured, then two buffers are allocated per channel. If MaxChannels is omitted, the NMS OAM configuration system assigns an appropriate value for the board type.
- MaxChannels is required in ISDN configurations.
See Also
- Buffers[x].Num
(Page 52 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.