(Page 58 of 80 in this chapter) Version
NetworkInterface.T1E1[x].ISDN.NFAS_ Member.Count
Syntax
- NetworkInterface.T1E1[x].ISDN.NFAS_Member.Count = number
- x = 0 | 1 | 2 | 3
Access
- Read-only
Type
- Integer
Allowed Values
- 1 - 20
Description
- Specifies the number of interfaces in the NFAS group. Calculated based on the number of T1E1[x].ISDNNFAS_MEMBER[y] structures specified. This keyword is valid only on the trunk where NetworkInterface.T1E1[x].D_Channel = ISDN.
- For more information about NFAS groups, refer to the NMS ISDN Installation Manual.
See Also
- NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Board, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].NAI, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Trunk, NetworkInterface.T1E1[x].ISDN.NFASGroup
(Page 58 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.