Table of Contents Index NMS Glossary Previous Page Next Page (Page 62 of 80 in this chapter) Version

NetworkInterface.T1E1[x].ISDN.NFASGroup

Syntax

NetworkInterface.T1E1[x].ISDN.NFASGroup = group_number

x = 0 | 1 | 2 | 3

Access

Read/Write

Type

Integer

Default

For every NFAS group, this keyword must be set in the configuration file of the board where the D Channel resides.

Allowed Values

0 - 255

Example

NetworkInterface.T1E1[0..3].ISDN.NFASGroup = 0

Description

Specifies the NFAS group number. If D_Channel is set to ISDN and NFASGroup is not specified, then this trunk will run ISDN but will not be part of an NFAS group.

This keyword is valid only on the trunk where NetworkInterface.T1E1[x].D_Channel = ISDN.

For more information about NFAS groups, refer to the NMS ISDN Installation Manual.

See Also

NetworkInterface.T1E1[x].D_Channel, NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Board, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].NAI, NetworkInterface.T1E1[x].ISDN.NFAS_ MEMBER[y].Trunk


Table of Contents Index NMS Glossary Previous Page Next Page (Page 62 of 80 in this chapter) Version

Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights reserved.