(Page 63 of 80 in this chapter) Version
NetworkInterface.T1E1[x].Length
Syntax
- NetworkInterface.T1E1[x].Length = length
- x = 0 | 1 | 2 | 3
Access
- Read/Write
Type
- Integer
Default
- 0
Allowed Values
- 0 - 655 feet
Example
- NetworkInterface.T1E1[0..3].Length = 0
Description
- Specifies the length of the cable connecting the board to the telephone network so the T1 framer can adjust the pulse shape accordingly. Adjust this value only if the cable is more than 200 feet in length, or if a lengthy cable is causing transmission problems.
Note: Do not use this keyword for E1 boards.
See Also
- NetworkInterface.T1E1[x].Type
(Page 63 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.