(Page 70 of 80 in this chapter) Version
RunFile
Syntax
- RunFile = filename
Access
- Read/Write
Type
- Filename
Default
- ag4000.cor
Description
- Specifies the runtime software to be transferred to the board. The RunFile is the core file that is used with module extension files (specified by DLMFiles[x]).
- RunFile is not mandatory.
Example
- RunFile = ag4000.cor
See Also
- DLMFiles[x]
(Page 70 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.