(Page 71 of 80 in this chapter) Version
SignalIdleCode
Syntax
- SignalIdleCode = signal_idlecode
Access
- Read/Write
Type
- Integer
Default
- If Xlaw = MU-LAW, default = 0.
- If Xlaw = A-LAW, default = 09.
Allowed Values
- 0x00 - 0xFF
Example
- SignalIdleCode = 0xd
Description
- Signal bit patterns transmitted by an idle DSP or to an unconnected line interface.
- In general, a DSP is considered to be idle when no application is using it.
See Also
- VoiceIdleCode
, Xlaw
(Page 71 of 80 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.