Returns information that identifies all H.100 streams operating at one specified speed.

DWORD swiGetStreamsBySpeed ( SWIHD swihd,
DWORD speed,
DWORD streams[],
unsigned maxcount,
unsigned *count)

swihd Handle returned by swiOpenSwitch.

speed Specifies in millions of bits per second the capacity of one or more streams. Refer to the Details section for acceptable values.

streams Array that receives the list of the
H.100 streams configured at the specified speed.

maxcount Maximum number of streams allowed.

count Pointer to the returned number of streams.

• SUCCESS
• CTAERR_DRIVER_ERROR
  The underlying driver retrieved an unrecognized error. Call swiGetLastError to retrieve the MVIP device error code.
• CTAERR_FUNCTION_NOT_AVAIL
  The underlying driver does not support the configuration of stream-specific characteristics of a local device.
• CTAERR_INVALID_HANDLE
  swihd is not a valid switch handle.
• SWIERR_INVALID_SPEED
  The specified speed is unrecognized. Use a speed value specified in the Details section.

• None.

This function is specific to MVIP-95. It retrieves a list of the H.100 streams that are operating at one specified speed.

Pass 0 for maxcount to get the number of streams only.

Acceptable values for speed are:

MVIP95_2MBPS_STREAM_SPEED
MVIP95_4MBPS_STREAM_SPEED
MVIP95_8MBPS_STREAM_SPEED

Refer to Section 6.2, Stream Speed Configuration for more information.

If CTAERR_DRIVER_ERROR is returned, call swiGetLastError to retrieve the MVIP device error code.

swiConfigStreamSpeed, swiGetLastError

void myPrintMVIP95Streams(SWIHD hd)
{
    DWORD *streams;
    unsigned count, i;

    /* First get number of streams, by specifying 0 for the maxcount */
    swiGetStreamsBySpeed(hd, MVIP95_2MBPS_STREAM_SPEED, streams, 0, &count);
    streams = (DWORD *)malloc(sizeof(DWORD)*count);

    /* Now get actual stream numbers */
    swiGetStreamsBySpeed(hd, MVIP95_2MBPS_STREAM_SPEED, streams, count, &count);

    printf("MVIP-95 compatible streams:\n");
    for (i = 0; i < count; i++)
    {
        printf("%d ", streams[i]);
    }
    printf("\n");
    free(streams);
}