(Page 5 of 40 in this chapter) Version
BootDiagnosticLevel
Syntax
- BootDiagnosticLevel = level
Access
- Read/Write
Type
- Integer
Default
- 0
Allowed Values
- 0 | 1 | 2 | 3
Example
- BootDiagnosticLevel = 0
Description
- Specifies the level of diagnostics during initialization of the board. The valid values for level are 0, 1, 2, and 3. Zero (0) indicates that no diagnostics are performed, and 3 is the maximum level. The trade-off for higher levels of diagnostics is the increased time needed to initialize each board at load time.
- If a test fails, the test number is reported back as an error code.
Note: Some tests can pass back more than one error code, depending on the options selected and/or the mode of failure.
- Certain tests will try to report additional information.
(Page 5 of 40 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2000, Natural MicroSystems, Inc. All rights
reserved.