(Page 3 of 40 in this chapter) Version
AutoStop
Syntax
- AutoStop = setting
Access
- Read/Write
Type
- String
Default
- NO
Allowed Values
- YES | NO
Example
- AutoStop = NO
Description
- Specifies whether the board automatically stops when ctdaemon is stopped.
- The Supervisor-level keyword AutoStopEnabled enables or disables the autostop feature. If AutoStopEnabled is set to YES, when ctdaemon is stopped the Supervisor stops each board whose AutoStop keyword is set to YES. If AutoStopEnabled is set to NO, no boards are stopped automatically, regardless of the setting of the AutoStop keyword.
- For details, see your NMS OAM System User's Manual.
See Also
- AutoStart
(Page 3 of 40 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.