(Page 10 of 40 in this chapter) Version
Clocking.HBus.FallBackClockSource
- For more information about setting up CT bus clocking, and rules and restrictions for configuring CT bus clocking, refer to Chapter 5 - Configuring Board Clocking.
Syntax
- Clocking.HBus.FallBackClockSource = clock_source
Access
- Read-only
Type
- String
Allowed Values
- OSC
Description
- This keyword is read-only for QX boards.
- This keyword is valid for QX 2000/100-4L boards only.
- This keyword indicates the alternate clock reference that will be used when the master clock does not function properly. For QX boards, the clock fallback source is the onboard oscillator (OSC).
See Also
- Clocking.HBus.AutoFallBack
, Clocking.HBus.ClockMode, Clocking.HBus.ClockSource
(Page 10 of 40 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights
reserved.