(Page 2 of 97 in this chapter) Version
AutoStart
Syntax
- AutoStart = start
Access
- Read/Write
Type
- String
Default
- NO
Allowed Values
- YES | NO
Example
- AutoStart = YES
Description
- Specifies whether the board automatically starts when ctdaemon is started or when the board is Hot Swap inserted.
Note: The Supervisor-level keyword AutoStartEnabled enables or disables the autostart feature. If AutoStartEnabled is set to YES when ctdaemon is started, the Supervisor starts each board whose AutoStart keyword is set to YES. If AutoStartEnabled is set to NO, no boards are started automatically, regardless of the setting of the AutoStart keyword in the board keyword files.
- For more information, refer to the NMS OAM System User's Manual.
See Also
- AutoStop
(Page 2 of 97 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, NMS Communications Corporation. All rights
reserved.