(Page 30 of 97 in this chapter) Version
DSP.C5x[x].NumRxTimeSlots
Syntax
- DSP.C5x[x].NumRxTimeSlots = x
- x = 0-(n-1) (A range of DSP cores where n equals the total number of DSP cores available.)
Access
- Read/Write
Type
- Integer
Default
- 16
Allowed Values
- 0, 16, 32, 128
Example
- DSP.C5x[0].NumRxTimeSlots = 16
Description
- Specifies the number of receive timeslots associated with each DSP. This is dependent upon the number of DSP hanging off the HMIC local stream.
See Also
- DSP.C5x[x].Files[y]
, DSP.C5x[x].Files[y], DSP.C5x[x].Os, DSP.C5x[x].NumTxTimeSlots, DSP.C5x[x].XLaw
(Page 30 of 97 in this chapter) Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, NMS Communications Corporation. All rights
reserved.