CG 6100C Installation and Developer's Manual
P/N 9000-60041-13
Version
Version
Table of Contents
1 Overview of the CG 6100C Board
- 1.1 Introduction
- 1.2 CG 6100C Board Features
- 1.2.1 Voice and Fax Support
- 1.3 Software Requirements
- 1.3.1 NMS OAM
- CG Board Plug-In
- 1.3.2 OAM Configuration Files
- 1.3.3 Runtime Software
- 1.3.4 Trunk Control Programs (TCPs)
- 1.3.5 Natural Access
2 Installing the Hardware
- 2.1 Introduction
- 2.2 Installation Summary
- 2.2.1 CG Driver Software
- 2.3 System Requirements
- 2.4 Installing the Hardware
- 2.4.1 T1/E1 120 Ohm Configuration
- 2.4.2 E1 75 Ohm Configuration
- 2.4.3 Sample T1 Trunk Configuration
- 2.4.4 Sample E1 Trunk Configuration
- 2.4.5 Keying the Chassis for CG 6100C Boards
- 2.4.6 Installing the Board
- 2.5 Trunk Connections
- 2.6 Connecting a CG 6100C Board to an E1 Network
- 2.6.1 Connecting a CG 6100C to an E1 120 Ohm
- 2.6.2 Connecting a CG 6100C to an E1 75 Ohm
- Grounding the Conductor
- 2.7 Connecting a CG 6100C Board to a T1 Network
- 2.7.1 Connecting a CG 6100C to the T1 Network
- 2.7.2 Ordering T1 Service
- 2.8 Loopback Configuration
-
3 Configuring the Board
- 3.1 Introduction
- 3.2 Adding Board Configurations to the NMS OAM Database
- 3.3 Configuring and Starting the System with oamsys
- 3.3.1 Creating a System Configuration File for oamsys
- Sample System Configuration File
- 3.3.2 Running oamsys
- 3.4 Changing Configuration Parameter Settings
- 3.4.1 Board Keyword Files
- 3.5 Configuring Board Clocking
- 3.5.1 Clocking References
- 3.5.2 Clocking Capabilities
- Clocking Capabilities as Primary Master
- Clocking Capabilities as Secondary Master
- Clocking Capabilities as Slave
- Other Clocking Capabilities
- 3.5.3 Clock Fallback
- 3.5.4 Configuring CT Bus Clocks with CG Keywords
- Configuring the Primary Clock Master
- Configuring the Secondary Clock Master
- Configuring Clock Slaves
- Configuring Standalone Boards
- 3.5.5 Example: Multiple Board System
- 3.5.6 NETREF Clocking
- 3.6 TDM Switch Streams and DSP Physical Layouts
- 3.7 Sample Board Keyword Files
- 3.7.1 No Call Control Configuration
- 3.7.2 Line Interface Configuration
- 3.7.3 Setting Up Resource Management for Multiple Pools
- 3.7.4 MFC Protocol for 20 DSP Cores with 16 Trunks
- 3.7.5 MFC Protocol and Voice for 20 DSP Cores with 8 Trunks
- 3.7.6 Assigning and Using Pooled Resources
- Creating DSP Resource Pools
- Implementing a Resource Sharing Algorithm
- 3.7.7 ISDN Protocol and Voice for 36 DSP Cores with 16 Trunks
- 3.8 Using DSP Resource Management Keywords
- 3.8.1 Resource Management Keywords
- 3.8.2 Resource Definition String Syntax
- 3.8.3 DSP Files
- Example: Configuring Available DSP Resources
- 3.8.4 Resource Definitions
- Example: All DPFs Running Exclusively
- Example: All DPFs Execute Simultaneously
- 3.8.5 Specifying Conditional Relationships Between DSP Functions
- Example 1
- Example 2
- 3.8.6 Echo Cancellation
4 Verifying the Installation
- 4.1 Introduction
- 4.2 LEDs
- 4.2.1 Trunk LEDs
- 4.2.2 Hot Swap LED
- 4.2.3 Ethernet LEDs
- 4.3 Verifying That the Board is Installed Correctly
- 4.4 Verifying That the Board is Working Correctly
- 4.5 Demonstration Programs
5 CG 6100C Switching
- 5.1 Introduction
- 5.1.1 Switch Blocking
- 5.2 CG 6100C Switch Models
- 5.2.1 CG 6100C Switch Model: CAS Mode
- Voice and Signaling Information Routing on T1 Trunks
(CAS Mode)
- Voice and Signaling Information Routing on E1 Trunks
(CAS Mode)
- Default Connections (CAS Mode)
- 5.2.2 CG 6100C Switch Model: PRI Mode
- Voice Information Routing on T1 Trunks (PRI Mode)
- Voice Information Routing on E1 Trunks (PRI Mode)
- T1/E1 Signaling Information Routing (PRI Mode)
- Default Connections (PRI Mode)
- 5.2.3 CG 6100C Switch Model: RAW Mode
- Voice Information Routing on T1 Trunks (RAW Mode)
- Voice Information Routing on E1 Trunks (RAW Mode)
- T1/E1 Signaling Information Routing (RAW Mode)
- Default Connections (RAW Mode)
6 CG Keyword Reference
- 6.1 Introduction
- 6.2 Keyword Types
- 6.2.1 Setting Keyword Values
- 6.2.2 Retrieving Keyword Values
- 6.3 Summary of Editable Keywords
- 6.4 Summary of Informational Keywords
- 6.5 Summary of Plug-in Keywords
- 6.6 Alphabetical Keyword Reference
- AutoStart
- AutoStop
- Boards[x]
- BootDiagnosticLevel
- BootDiagnosticMask
- Buffer[x].Size
- Clocking.HBus.AutoFallBack
- Clocking.HBus.ClockMode
- Clocking.HBus.ClockSource
- Clocking.HBus.ClockSourceNetwork
- Clocking.HBus.FallBackClockSource
- Clocking.HBus.FallBackNetwork
- Clocking.HBus.NetRef2Source
- Clocking.HBus.NetRef2SourceNetwork
- Clocking.HBus.NetRef2Speed
- Clocking.HBus.NetRefSource
- Clocking.HBus.NetRefSourceNetwork
- Clocking.HBus.NetRefSpeed
- Clocking.HBus.SClockSpeed
- Clocking.HBus.Segment
- DebugMask
- DetectedBoards[x]
- DLMFiles[x]
- Driver.BoardId
- Driver.Name
- DSP.C5x[x].Files[y]
- DSP.C5X[x].Image
- DSP.C5x[x].Libs[y]
- DSP.C5x[x].NumRxTimeSlots
- DSP.C5x[x].NumTxTimeSlots
- DSP.C5x[x].Os
- DSP.C5x[x].XLaw
- DSPStream.SignalIdleCode[x]
- DSPStream.SlotCount
- DSPStream.VoiceIdleCode[x]
- Eeprom.AssemblyRevision
- Eeprom.DSPExtClk
- Eeprom.DSPSpeed
- Eeprom.DSPType
- Eeprom.Family
- Eeprom.FlashBlkSz
- Eeprom.FlashID
- Eeprom.HostBusType
- Eeprom.MFGWeek
- Eeprom.MFGYear
- Eeprom.MSBType
- Eeprom.NumCPU
- Eeprom.NumDaughterCard
- Eeprom.NumDSPCores
- Eeprom.NumSwitch
- Eeprom.NumTrunk
- Eeprom.Product
- Eeprom.SerialNum
- Eeprom.SoftwareCompatibility
- Eeprom.SwitchType
- Eeprom.TrunkType
- EnableMonitor
- Hdlc[x].Boot
- Hdlc[x].RxTimeSlot
- Hdlc[x].TxTimeSlot
- Location.PCI.Bus
- Location.PCI.Slot
- Location.Type
- MaxChannels
- Name
- NetworkInterface.T1E1[x].ConfigFile
- NetworkInterface.T1E1[x].CRCMFMode
- NetworkInterface.T1E1[x].D_Channel
- NetworkInterface.T1E1[x].FrameType
- NetworkInterface.T1E1[x].Impedance
- NetworkInterface.T1E1[x].ISDN.D_Channel_Backup_Trunk
- NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Board
- NetworkInterface.T1E1[x].ISDN.NFAS_Member.Count
- NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].NAI
- NetworkInterface.T1E1[x].ISDN.NFAS_Member[y].Trunk
- NetworkInterface.T1E1[x].ISDN.NFASGroup
- NetworkInterface.T1E1[x].Length
- NetworkInterface.T1E1[x].LineCode
- NetworkInterface.T1E1[x].SignalingType
- NetworkInterface.T1E1[x].Type
- Number
- Products[x]
- Resource[x].Definitions
- Resource[x].Name
- Resource[x].Size
- Resource[x].StartDspTimeSlot
- Resource[x].TimeSlotRange
- Resource[x].TCPNum
- Resource[x].TCPs
- State
- SwitchConnections
- SwitchConnectMode
- SwitchDriver.Name
- TCPFiles[x]
- Version.Major
- Version.Minor
Appendix A Hardware Specifications
- Specifications
- Media Stream DSP Processing
- PSTN Network Connectivity
- Intra-chassis Connectivity
- Software Environment
- General
- 480 Port Configuration
- Host Interface
- H.110 Compliant Interface
- Environment
- Power Requirements for CG 6100C
- CG 6100C Power Requirements with Daughterboard
- CEPT E1 G.703 Telephony Interface
- DSX-1 Telephony Interface
- Compliance and Approvals
- EMC
- Safety
- Telecom
- International Approvals
- EU R&TTE Statement
- Standards
Appendix B DSP Resource Management
- Introduction
- Managed Resources
- DSPs, DPMs, and DPFs
- DSP Resources
- Worst-Case Resource Management Calculation
- Example
- Resource Calculations
- Overall Resource Requirements
- Resource Management Keywords
- Resource Definition String Syntax
- DSP Files and Resource Definitions
- Example: Configuring Available DSP Resources
- Resource Definitions
- Input and Output Slots
- Resource Definition Examples
- Example: All DPFs Running Exclusively
- Example: All DPFs Running Simultaneously
- Example: Some DPFs Running Simultaneously
- Specifying Relationships Between DPFs
- Example 1
- Example 2
- Natural Access Media Masks and Call Progress Masks
- Echo Cancellation Restriction
- Trunk Control Program Resource Usage
- Debugging Resource Management
- Using CG 6100C Debug Masks
- Resource Management Board Errors
- Debugging Resource Management With cgtrace
- Default Functions Available for CG 6100C Boards
- Custom Functions Available for CG 6100C Boards
- DSP Files and MIPS Requirements
- Echo Cancellation MIPS
Appendix C T1 and E1 Trunk Channels
- Introduction
- E1 Channels and Transmission Rates
- Signaling
- Channel Associated Signaling (CAS)
- Common Channel Signaling (CCS)
- Framing
- T1 Framing
- E1 Framing
- Voice Encoding
- Companding
- AMI, Ones Density, and Zero Code Suppression
Appendix D Demonstration Programs and Utilities
- Multiple Pool Demonstration Program: c6t2tivr
- DSP Module Description Utility: f54info
- Display Flash Memory and RAM: cg6ktool
- CG Board Trace Utility: cgtrace
Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, NMS Communications Corporation. All rights
reserved.