(Page 7 of 18 in this chapter)
2.6 Collecting Digits (DTMFs)
In addition to the individual DTMF events, AG Access provides both synchronous and asynchronous digit collection functions. Refer to the
AG Access Developer's Manual
for a detailed discussion on digit collection and how to incorporate it into your application.
The following AG Access functions control digit collection:
To...
Use...
Retrieve a single digit from the internal digit collection queue
adiGetDigit
Read the first digit from the internal digit collection queue without removing it
adiPeekDigit
Flush the internal digit collection queue
adiFlushDigitQueue
Start asynchronous digit collection
adiCollectDigits
Terminate digit collection
adiStopCollection
(Page 7 of 18 in this chapter)
Tech_Support@nmss.com
Copyright © 1996, Natural MicroSystems, Inc. All rights reserved.
(Page 7 of 18 in this chapter) (Page 7 of 18 in this chapter)