(Page 9 of 18 in this chapter)
2.8 Detecting DTMFs and MFs
AG Access provides functions for enabling and disabling DTMF and MF detection. Note that by default, DTMF detection is enabled automatically when a call is established (see the
AG Access Developer's Manual
for more information).
The following functions enable and disable DTMF and MF tone detection:
To...
Use...
Start DTMF detection (note that by default it is on)
adiStartDTMFDetector
Stop DTMF detection
adiStopDTMFDetector
Start the MF tone detector
adiStartMFDetector
Stop the MF tone detector
adiStopMFDetector
(Page 9 of 18 in this chapter)
Tech_Support@nmss.com
Copyright © 1996, Natural MicroSystems, Inc. All rights reserved.
(Page 9 of 18 in this chapter) (Page 9 of 18 in this chapter)