(Page 6 of 6 in this chapter)
4.5 System Restrictions
- The following operations are typically configured to share the same group of task processors:
- Voice record
- Voice playback
- Tone generation
- MF detection
- For the typical configuration, DSP capacity is allotted under the assumption that every port is running at most one of these functions at any given time. If you concurrently execute a combination of these functions, you will likely exhaust the DSP capacity.
- If the port started the NOCC protocol, call progress functions can be executed at any time. Otherwise, call progress can only be run after the call enters the Connected state.
(Page 6 of 6 in this chapter)
tech_support@nmss.com
Copyright © 1997, Natural MicroSystems, Inc. All rights
reserved.