(Page 2 of 7 in this chapter)
5.1 Introduction
- The MC1 board switches data between the MVIP bus and the MC1 bus allowing MVIP boards in one PC to communicate with MVIP boards in another PC. The computers are connected by external cables that provide the physical connection of the MC1 bus. Each PC in the system must have a Natural MicroSystems MC1 interface board.
- This chapter presents information about the MC1 board and about building a multi-chassis system. The following topics are discussed:
(Page 2 of 7 in this chapter)
Tech_Support@nmss.com
Copyright © 1996, Natural MicroSystems, Inc. All rights
reserved.