Table of Contents

- A -

ABCD bits : and D3/D4 framing 1

ABCD bits : and E&M protocols 1

ABCD bits : and E1 trunks 1, 2

ABCD bits : and ESF framing 1

ABCD bits : and MFC-R2 protocols 1

ABCD bits : and T1 trunks 1, 2

ABCD bits : described 1, 2, 3

AG Access : described 1

AG Access : installing 1, 2

AG Access : MVIP switching under 1, 2

AG Access : sample AG config files in 1

AG configuration file : Address statement in 1

AG configuration file : and agmon 1

AG configuration file : Board x statement in 1, 2

AG configuration file : ClockRef statement in 1

AG configuration file : creating 1

AG configuration file : described 1, 2, 3

AG configuration file : DigitalMode statement in 1

AG configuration file : EnableMVIP statement in 1

AG configuration file : End Board statement in 1, 2

AG configuration file : FrameType statement in 1

AG configuration file : Interrupt statement in 1

AG configuration file : LineCode statement in 1

AG configuration file : LineLength statement in 1, 2

AG configuration file : loopback 1

AG configuration file : Runfile statement in 1

AG configuration file : RunFile statement in 1

AG configuration file : sample 1, 2

AG configuration file : search path 1

AG configuration file : TCP statement in 1, 2

AG ISDN software : installation 1

ag.rpt 1

AG-E1 : compliance 1, 2

AG-E1 : connecting to network 1

AG-E1 : described 1

AG-E1 : diagram 1

AG-E1 : LEDs 1

AG-E1 : on-board oscillator 1

AG-E1 : regulatory documentation 1

AG-E1 : sample AG configuration file 1

AG-E1 : sample configuration file 1

AG-E1 : specifications 1

AG-E1 : switch device name 1

AG-E1 : trunk interface 1

AG-E1 : trunk interface connectors 1

AG-E1 : versions 1

AG-E1 : zero code suppression algorithms supported 1

agerror.log 1

agmon : and AG configuration file 1

agmon : described 1, 2

agmon : downloads TCP to board 1

agmon : output 1

agmon : running 1

agmon : search path 1

AG-T1 : compliance 1

AG-T1 : connecting to network 1

AG-T1 : connecting with CSU 1

AG-T1 : connecting without CSU 1

AG-T1 : described 1

AG-T1 : diagram 1

AG-T1 : LEDs 1

AG-T1 : on-board oscillator 1

AG-T1 : sample configuration file 1, 2

AG-T1 : specifications 1

AG-T1 : switch device name 1

AG-T1 : trunk interface 1

AG-T1 : trunk interface connectors 1

AG-T1 : zero code suppression algorithms supported 1

Alarm Indication Signal (AIS) : behavior in proper installation 1

Alarm Indication Signal (AIS) : described 1

Alarm Indication Signal (AIS) : specifications 1, 2

Alarm Indication Signal (AIS) : status indicator LEDs for 1

a-law : described 1

A-law : described 1

a-law : runfiles for 1

Alliance Generation Board (AG board) 1

Ally board 1

Alternate Mark Inversion (AMI) : described 1, 2

Alternate Mark Inversion (AMI) : selecting using LineCode statement 1

audio signal processing specifications 1

- B -

bearer channel (B channel) : described 1, 2

bearer channel (B channel) : in ISDN 1

bearer channel (B channel) : on E1 trunks 1

bearer channel (B channel) : on T1 trunks 1

Binary 8 Zero Substitution (B8ZS) : described 1, 2

Binary 8 Zero Substitution (B8ZS) : selecting using LineCode statement 1

bipolar violation 1, 2

Blue Alarm : described 1

Blue Alarm : status indicator LED 1

board number : in Board x statement 1, 2

board number : specifying in switch device name 1

Board x statement 1, 2

- C -

cable : connecting in loopback configuration 1

cable : MVIP bus 1

cable : positioning boards on MVIP cable 1

cable : supplied with AG-E1 boards 1

cable : supplied with AG-T1 boards 1, 2

cable : supplied with boards 1

cable : Teflon 1

call progress analysis 1

CAS Mode : default MVIP connections in 1

CAS Mode : E1 trunk to MVIP timeslot connection in 1

CAS Mode : specifying in AG config file 1

CAS Mode : T1 trunk to MVIP timeslot connection in 1

CEPT : described 1

CEPT : interface specifications 1

CEPT : selecting using FrameType statement 1

CEPT : trunk interface 1, 2

channel 1

channel : described 1

channel associated signaling (CAS) : described 1, 2

channel associated signaling (CAS) : developers' documentation 1

channel associated signaling (CAS) : mapping to MVIP timeslots (E1) 1

channel associated signaling (CAS) : mapping to MVIP timeslots (T1) 1

channel associated signaling (CAS) : on E1 trunks 1

channel associated signaling (CAS) : on T1 trunks 1, 2

channel associated signaling (CAS) : protocol documentation 1

channel service unit (CSU) : acquiring 1

channel service unit (CSU) : described 1, 2

channel service unit (CSU) : T1 trunk interface involving 1

channels 1

clock master : described 1, 2

clock master : determining source with ClockRef statement 1

clock master : positioning in system 1

clock slave : described 1, 2

clock slave : determining with ClockRef statement 1

clock slave : positioning in system 1

codec 1

common channel signaling (CCS) : described 1, 2

common channel signaling (CCS) : mapping to MVIP timeslots (E1) 1

common channel signaling (CCS) : mapping to MVIP timeslots (T1) 1

common channel signaling (CCS) : on E1 trunks 1

common channel signaling (CCS) : on T1 trunks 1

companding : choosing method 1

companding : described 1

connectors : DSP daughterboard 1

connectors : MVIP 1

connectors : trunk interface 1

CT Access : described 1

CT Access : installing 1, 2

CT Access : MVIP switching under 1, 2

cyclic redundancy check (CRC) 1

Cyclic Redundancy Check (CRC) : described 1

Cyclic Redundancy Check (CRC) : status indicator LED for 1

- D -

D3/D4 framing : described 1

D3/D4 framing : selecting using FrameType statement 1

data channel (D channel) : described 1, 2

data channel (D channel) : in ISDN 1

data channel (D channel) : on E1 trunks 1

data channel (D channel) : on T1 trunks 1

developer support 1

digital signal level 0 1

digital signal level 1 1

Digital Signal Processor (DSP) : described 1

DS-0 1

DS-1 : described 1

DSP daughterboard : connectors 1

DSP daughterboard : described 1, 2

DSP daughterboard : DSP tasks requiring daughterboard 1

DSP resources : described 1

DSP resources : mapping signaling to if EnableMVIP=NO 1

DSP resources : specifications 1, 2

DSX-1 : described 1, 2

DSX-1 : specifications 1

DSX-1 : trunk interface 1

DTMF 1

DTMF : tone detection specifications 1

- E -

E&M : and ABCD bits 1

E&M : described 1

E&M : developers' documentation 1

E&M : protocol documentation 1

E1 : alternate mark inversion 1

E1 : B channel on 1

E1 : connecting to 1

E1 : D channel on 1

E1 : deriving MVIP clock from 1

E1 : described 1

E1 : framing 1

E1 : interfacing 1

E1 : mapping to MVIP timeslots 1, 2

E1 : NFAS not supported 1

E1 : ones density 1

E1 : voice encoding 1

E1 : zero code suppression 1

E1 trunk 1

e1stat : described 1, 2

e1stat : display 1

e1stat : location 1

e1stat : usage 1

e1stat : using to verify installation 1

e1test 1

echo cancellation 1

EnableMVIP statement : default connections if EnableMVIP=NO 1

EnableMVIP statement : enabling/disabling MVIP switching with 1

Extended SuperFrame (ESF) : described 1

Extended SuperFrame (ESF) : selecting using FrameType statement 1

- F -

Facilities Data Link (FDL) : described 1

facilities data link (FDL) : in E1 framing 1

Facilities Data Link (FDL) : in ESF framing 1

fax : DSP resources 1

fax : NaturalFax 1

frame : described 1

frame : E1 1

frame : T1 1

framing : E1 1

framing : selecting method with FrameType statement 1

framing : specifications 1, 2

framing : T1 1

Framing bit (F bit) : described 1

framing bit (F bit) : in D3/D4 framing 1

framing bit (F bit) : in ESF framing 1

full duplex : described 1

- H -

hardware installation : connecting AG-E1 to network 1

hardware installation : connecting AG-T1 to network 1

hardware installation : installing in system (no MVIP connectivity) 1

hardware installation : installing in system (with MVIP connectivity) 1

hardware installation : requirements 1

hardware installation : summary 1

hardware installation : verifying 1

HDLC controller : described 1

HDLC controller : mapping E1 signaling to 1, 2, 3

HDLC controller : mapping T1 signaling to 1, 2, 3

High Density Bipolar 3 (HDB3) : described 1, 2

High Density Bipolar 3 (HDB3) : selecting using LineCode statement 1

- I -

I/O address : configuring hardware 1

I/O address : configuring in AG config file 1

I/O address : default hardware setting 1

I/O address : described 1

I/O address : selector switch diagram 1

I/O address : specifications 1

in-band 1

interrupt : default 1

interrupt : described 1

interrupt : selecting in AG config file 1

interrupt : specifications 1

ISA : and AG-T1/E1 boards 1

ISA : bus connectors 1

ISA : described 1

ISA : hardware requirements 1

ISA : specifications 1

ISDN : and Network Facility Associated Signaling 1

ISDN : described 1

ISDN : developers' documentation 1

ISDN : protocol documentation 1

ISDN : signaling 1

- J -

jammed bit ZCS : described 1, 2

jammed bit ZCS : selecting using LineCode statement 1

- L -

line : described 1

loop start : adding line interfaces over MVIP bus 1

loop start : described 1

loopback : block 1

loopback : configuring hardware 1

loopback : described 1

loopback : sample AG configuration file 1

loopback : specifications 1, 2

loopback : verifying installation using 1

- M -

M24 superframe 1

M24 superframe : described 1

MC1 1

memory requirements 1

MF 1, 2

MF : tone detection specifications 1

MFC-R2 1, 2

MFC-R2 : and ABCD bits 1

MFC-R2 : described 1

MFC-R2 : developers' documentation 1

MFC-R2 : protocol documentation 1

modem 1

mu-law : described 1, 2

mu-law : runfiles for 1, 2

multiframe 1, 2

multiplexing 1

MVIP : described 1

MVIP bus : connector 1

MVIP bus : described 1

MVIP bus : positioning boards on 1

MVIP bus : products from other manufacturers 1

MVIP bus : specifications 1

MVIP bus : using Teflon cable 1

MVIP clock : configuring master and slaves 1

MVIP clock : configuring source with ClockRef statement 1

MVIP clock : deriving from Sec8k clock 1

MVIP clock : deriving from trunk clock 1

MVIP clock : described 1

MVIP clock : driving when board is isolated from network 1

MVIP switching : AG-T1/AG-E1 switch device name 1

MVIP switching : default connections if EnableMVIP=NO 1

MVIP switching : described 1

MVIP switching : enabling/disabling 1

MVIP switching : model (MVIP-90) 1

MVIP switching : model (MVIP-95) 1

MVIP switching : products from other manufacturers 1

MVIP switching : related documents 1

MVIP switching : under AG Access 1, 2

MVIP switching : under CT Access 1, 2

MVIP switching : with SW Utility 1

MVIP switching : with swish 1

MVIP switching : with SwitchPath 1

MVIP timeslots : mapping E1 trunk to 1, 2

MVIP timeslots : mapping T1 trunk to 1, 2

- N -

Natural Media 1

NaturalFax 1

NaturalRecognition 1

NaturalText 1

NaturalText : DSP resources 1

Network Facility Associated Signaling (NFAS) : described 1, 2

Network Facility Associated Signaling (NFAS) : mapping to MVIP timeslots 1

Network Facility Associated Signaling (NFAS) : not supported on E1 trunks 1

- O -

off-hook 1

ones density : described 1, 2

out-of-band 1

- P -

PRI Mode : default MVIP connections in 1

PRI Mode : E1 trunk to MVIP timeslot connection in 1

PRI Mode : specifying in AG config file 1

PRI Mode : T1 trunk to MVIP timeslot connection in 1

protocol : described 1, 2

protocol : differ in different countries 1

Pulse Code Modulation (PCM) 1, 2

pulse dialing specifications 1

- R -

RAW Mode : default MVIP connections in 1

RAW Mode : specifying in AG config file 1

RAW Mode : T1 trunk to MVIP timeslot connection in 1

Red Alarm : behavior in proper installation 1

Red Alarm : described 1

Red Alarm : status indicator LED 1

robbed bit signaling : and D3/D4 framing 1

robbed bit signaling : and ESF framing 1

robbed bit signaling : described 1, 2

runfile : described 1, 2, 3

- S -

Sec8k clock : configuring 1, 2

Sec8k clock : described 1, 2

Sec8k clock : driving MVIP clock with 1

showsig 1

signaling : controlled by TCP 1

signaling : methods 1

signaling routing mode : T1, if DigitalMode=CAS 1

signaling routing mode : T1, if DigitalMode=PRI 1

signaling routing mode : additional MVIP connections if EnableMVIP=NO 1

signaling routing mode : E1, if DigitalMode=CAS 1

signaling routing mode : E1, if DigitalMode=PRI 1

signaling routing mode : specifying in AG config file 1

signaling routing mode : T1, if DigitalMode=RAW 1

specifications 1

speech recognition : DSP daughterboard needed 1

speech recognition : DSP resources 1, 2

speech recognition : NaturalRecognition 1

status indicator LEDs : diagram 1, 2

status indicator LEDs : what each one means 1

SW Utility : described 1, 2, 3

SW Utility : related documents 1

swish 1, 2

SwitchPath : AG-T1/AG-E1 switch device name 1

SwitchPath : described 1, 2, 3

SwitchPath : related documents 1

- T -

T1 : alternate mark inversion 1

T1 : B channel on 1

T1 : CAS on 1

T1 : common channel signaling on 1

T1 : connecting through CSU 1

T1 : connecting to 1

T1 : connecting without CSU 1

T1 : D channel on 1

T1 : deriving MVIP clock from 1

T1 : described 1

T1 : framing 1

T1 : interfacing 1

T1 : mapping to MVIP timeslots 1, 2

T1 : Network Facility Associated Signaling on 1

T1 : ones density 1

T1 : ordering service 1

T1 : zero code suppression 1

T1 trunk 1

t1stat : described 1, 2

t1stat : display 1, 2

t1stat : location 1

t1stat : usage 1

t1stat : using to verify installation 1

t1test 1

text-to-speech : DSP resources 1

text-to-speech : NaturalText 1

Time Division Multiplexing (TDM) 1

time-division multiplexing (TDM) 1

timeslots : described 1

timeslots : E1 1

timeslots : T1 1

trunk 1

trunk control program (TCP) : available for different countries 1

trunk control program (TCP) : described 1

Trunk Control Program (TCP) : described 1

trunk control program (TCP) : how supplied 1

trunk control program (TCP) : installing 1, 2

trunk control program (TCP) : multiple 1

trunk control program (TCP) : needed to interpret signaling on trunk 1

trunk control program (TCP) : protocol-independent 1

trunk control program (TCP) : runs on board 1

trunk control program (TCP) : specifying in AG config file 1

trunk interface : AG-E1 1

trunk interface : AG-T1 1

trunk interface : connectors 1, 2

trunk interface : pinouts (BNC) 1

trunk interface : pinouts (RJ48C) 1

- U -

uninterruptible power supply (UPS) 1

- V -

voice : encoding 1

voice : playback 1

voice : pulse code modulation (PCM) 1

voice : recording 1

voice : signal processing specifications 1

- Y -

Yellow Alarm : behavior in proper installation 1

Yellow Alarm : described 1

Yellow Alarm : status indicator LED 1

- Z -

zero code suppression (ZCS) : algorithms for 1

zero code suppression (ZCS) : described 1

zero code suppression (ZCS) : selecting algorithm using LineCode statement 1

zero code suppression (ZCS) : specifications 1

Natural MicroSystems, Inc.
100 Crossing Boulevard
Framingham, MA 01702

Contact Developer Support