This manual:
This document is targeted to developers of telephony and voice applications who are using CT Access or AG Access. This document defines telephony terms where applicable, but assumes that you are familiar with C programming and with MVIP switching. To learn more about MVIP switching, see the Getting Started With MVIP Switching manual.
This manual is organized as follows:
|
For this information... |
See this chapter... |
|
An overview of the AG-T1 and AG-E1 and related software components, and a summary of the steps in the installation process |
Chapter 1: Introduction |
|
Instructions on configuring the hardware and installing it in your computer |
Chapter 2: Installing an AG-T1 or AG-E1 |
|
Instructions for editing your AG configuration file so it properly reflects your setup |
Chapter 3: Editing The AG Configuration File |
|
Verification procedures to check your installation |
Chapter 4: Verifying The Installation |
|
An overview of T1 and E1 standards, and how the AG-T1 and AG-E1 interface with these trunks |
Chapter 5: Trunk Channels and AG Boards |
|
A discussion of the AG-T1 and AG-E1's MVIP connectivity |
Chapter 6: MVIP Connectivity |
|
A glossary of terms |
|
|
Documentation of trunk testing utilities |
|
|
Information on how to set up a backup MVIP clock |
|
|
Specifications for the AG-T1 and AG-E1 hardware |
For more information about related NMS products, refer to the following manuals:
General
CT Access
|
This manual... |
Provides... |
|
CT Access Developer's Reference Manual |
An overview of CT Access and a reference of functions, events, reason codes, and errors. |
|
CT Access Migration Manual |
Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath. |
|
CT Access Installation Manual |
A description of the installation of the software from the distribution diskettes and the configuration file and a procedure for verifying your installation. |
|
AG Access Installation Manual |
The installation procedure for the ADI service component of CT Access. |
|
AG Runtime Configuration and Developer's Manual |
Information about the AG configuration file, agmon, AG board and driver error messages, and AG task processors. |
|
MVIP-95 Device Driver Standard |
Information about MVIP-95, available from GO-MVIP. |
|
H-MVIP Standard |
Information about H-MVIP, available from GO-MVIP. |
|
MVIP-90 Standard |
Information about MVIP-90, available from GO-MVIP. |
The following manuals provide an overview of the capabilities and functions of the services that use CT Access:
AG Access
|
This manual... |
Provides... |
|
AG Access Installation Manual |
Instructions for installing and configuring AG Access, and for using the agmon AG board configuration and monitoring utility. |
|
AG Access Developer's Manual |
Descriptions of how to use the AG Access API. |
|
AG Access Function Reference Manual |
A comprehensive reference of functions. |
|
SW Utility User's Guide |
|
|
SwitchPath Technical Reference Manual |
For GO-MVIP information, please contact:
GO-MVIP, Inc.
3220 N Street, NW, Suite 360
Washington, DC 20007
Tel: 800-NOW-MVIP (US and Canada)
Tel: 903-769-3717; Fax: 903-769-3818
Email: info@mvip.org
For ECTF information, please contact:
ECTF
39355 California Street, Suite 307
Fremont, CA 94538
Tel: 501-608-5915
Fax: 510-608-5917
Email:ectf@ectf.org
Natural MicroSystems, Inc.
100 Crossing Boulevard
Framingham, MA 01702