Version
Index
A
- ABCD bits 225, 230
- Access Network applications. See AN applications
- Access303
- building the library 15-16
- data types 41
- description 27-28
- GR-303 protocol support 13
- integrating with NMS GR303 41-45
- interaction with NMS GR303 functions 60-64
- overview 13
- use with NSM GR303 functions 60-64
- acronyms 17-18
- adding E1 links to V5.2 interfaces 70
- ADI service 23
- aim303 integration utility
- building the executable 15
- overview 16
- verifying system integration 44
- aimv5 integration utility
- building the executable 15
- overview 16
- verifying system integration 49
- A-law 231
- alternate mark inversion 232
- AMI 232
- AN applications
- application development 15
- building the application 50
- defined 17
- integrating the system 46-50
- AV5
- building the library 15-16
- data types 46
- description 28-29
- integrating with NMS V5 46-50
- interaction with NMS V5 library functions 75-81
- overview 14
- V5 protocol support 14
B
- B channel 226
- B8ZS 232
- BCC 17
- bearer channel 226
- binary 8-zero suppression 232
C
- C++ development environment 12, 20
- callback functions
- NMS GR303 callback events 113, 202-203
- NMS GR303 channel callback 54, 56, 61-64, 108, 111-112, 123
- NMS GR303 trace callback 119-121
- NMS V5 callback events 151, 206-207
- NMS V5 channel callback 68, 71, 145, 148, 150
- NMS V5 E1 status callback 68, 71, 147, 149-150
- NMS V5 trace callback 167-169
- CAS 225
- CCS 226
- CG boards
- configuring through NMS OAM 32-37
- E1 and T1 interfaces 20
- overview 20-21
- runtime software 25
- system requirement 12
- verifying E1 connections 48-49
- verifying T1 connections 43
- channels. See HDLC
- checking link IDs (NMS V5 and AV5) 79
- CO 18
- Common Channel Signaling 226
- companding 231
- CRC errors 96, 100, 137
D
- D channel 226
- D4 framing 227-228
- data channel 226
- deleting E1 links from V5.2 interfaces 70
- demonstration programs. See nms303tool and nmsv5tool
- destroying a standby interface variant 73
- destroying an interface
- NMS GR303 56, 58, 91
- NMS V5 72-73, 131
- Digital Loop Carrier Protocols. See DLCPs
- digital signal level 0 224
- digital signal level 1 224
- DLCPs
- See also GR-303 protocol
- See also V5.2 protocol
- defined 10, 17
- overview 10-11
- DS1. See T1
E
- E1
- See also callback functions
- adding an E1 link 127-128
- CAS protocols 225
- destroying an E1 link 129
- framing 226, 229-230
- retrieving E1 link status information 139-141
- setting the SA7 E1 framing bit 71, 165-166
- transmission rate 224
- EOC 18
- errored seconds 99
- errors
- alphabetical listing 202-203, 206-207
- NMS GR303 200-201
- NMS V5 204-205
- numerical listing 205
- ESF 227-229
- ETSI 18
- EVENT_TX_QUEUE_FULL 56
- Exchange303
- building the library 15-16
- description 27-28
- GR-303 protocol support 13
- integrating with NMS GR303 41-45
- overview 13
- use with NSM GR303 functions 60-64
- exiting the library
- NMS GR303 58, 93
- NMS V5 73, 134
- Extended SuperFrame 227-229
F
- Facilities Data Link 228
G
- GR-303 protocol
- See also Access303
- See also Exchange303
- See also NMS GR303
- described 28
- overview 13
H
- HDB3 232
- HDLC
- See also callback functions
- CG board controllers 20
- channel statistics with NMS GR303 57, 94-96
- channel statistics with NMS V5 55, 135-137
- configuring through NMS OAM 36-37
- defined 18
- destroying channels with NMS GR303 58, 91
- destroying channels with NMS V5 72, 131
- modifying channel locations with NMS GR303 55-56, 104-105
- provisioning channels with NMS GR303 54, 110-113
- provisioning channels with NMS V5 68-69, 147-151
- high density bipolar 3 code 232
I
- IDT applications
- and Exchange303 13
- and NMS GR303 12
- application development 15
- building the application 45
- defined 18
- integrating the system 41-45
- initializing an interface
- NMS GR303 and Aztek GR-303 stack 61
- NMS V5 and AV5 functions 76
- initializing the library
- NMS GR303 54, 102-103
- NMS V5 68, 142
- Integrated Digital Terminal applications. See IDT applications
- integrating the system. See system integration
- ISDN
- B8Zs 232
J
- jammed bit 7 232
L
- LAPD
- defined 18
- frame size 107
- frames 53
- LAPV
- defined 18
- messages 69
- LDS 18
- LE 18
- LEC 18
- line code violations 99
M
- modifying HDLC channel locations 55, 104-105
- modifying standby locations 64
- mu-law 231
- multiframe 230
N
- Natural Access
- See also NMS OAM
- features 22
- overview 21-23
- services 23
- system requirement 12
- NMS 69
- NMS GR303
- See also callback functions
- building applications 45
- channel callback events 202-203, 206
- component 12
- data types 41, 210-215
- destroying an interface 56, 58, 91
- errors 200-201, 204-205
- exiting the library 58, 93
- features 52-53
- initializing the library 54, 102-103
- integrating with Aztek GR-303 stack 41-45
- interaction with Aztek GR-303 stack functions 60-64
- modifying an HDLC channel location 55, 104-105
- provisioning an interface 54, 68, 110-113
- reprovisioning an interface 56
- resetting channel statistics 115-116
- resetting HDLC channel statistics 55
- resetting T1 link status information 55, 117-118
- retrieving channel statistics 94-96
- retrieving HDLC channel statistics 55, 57
- retrieving T1 link status information 54-55, 98-100
- sending data to provisioned channels 55-56, 107-109
- setting trace levels 54, 119-122
- starting an interface 54-55, 123
- state diagram 59-60
- stopping an interface 56-57, 125
- testing functions with nms303tool 44
- NMS OAM
- board keyword files 25, 33-34
- configuration files 12, 21
- configuring E1/T1 interfaces 35
- configuring HDLC instances 36-37
- configuring the CG board 15, 33-37
- features 21, 23
- oamcfg 24
- oammon 24
- oamsys 24, 32, 34
- overview 23-25
- sample board keyword files 33
- system configuration files 34
- NMS V5
- See also callback functions
- adding an E1 link 127-128
- adding E1 links to V5.2 interfaces 70
- building applications 50
- component 12
- data types 46, 216-221
- deleting an E1 link 129-130
- deleting E1 links from V5.2 interfaces 70
- destroying a standby variant 73
- destroying an interface 72-73, 131
- exiting the library 73, 134
- features 66-67
- initializing the library 68, 142-143
- integrating with AV5 46-50
- interaction with AV5 functions 75-81
- provisioning a standby variant 70, 154-159
- provisioning an interface 147-151
- resetting channel statistics 161-162
- resetting E1 link status information 71-72, 163
- resettinging HDLC channel statistics 72
- retrieving channel statistics 135-137
- retrieving E1 link status information 68, 71-72, 139-141
- retrieving HDLC channel statistics 72
- sending data to provisioned channels 71, 144-145
- setting the SA7 framing bit 71, 165-166
- setting trace levels 68, 167-170
- starting an interface 69, 171
- state diagram 74-75
- stopping an interface 72-73, 173
- switching over to a standby variant 70, 175
- testing functions with nmsv5tool 49
- NMS_GR303_BOARD_FAMILY_T 211
- NMS_GR303_CHANNEL_LOCATION_T 212
- NMS_GR303_CHANNEL_STATISTICS_T 214-215
- NMS_GR303_DS1_LOCATION_T 211
- NMS_GR303_DS1_STATUS_T 213
- NMS_GR303DestroyInterface
- description 91
- example 92
- overview 56, 58
- summary 85
- NMS_GR303Exit
- description 93
- example 93
- overview 58
- summary 84
- NMS_GR303GetChannelStatistics
- description 94-96
- example 97
- overview 55, 57
- summary 86
- NMS_GR303GetDS1Status
- description 98-100
- example 101
- overview 54-55, 57
- summary 86
- NMS_GR303Initialize
- description 102-103
- example 103
- overview 54
- summary 84
- NMS_GR303ModifyChannelLocation
- description 104-105
- example 106
- overview 55-56
- summary 85
- NMS_GR303PhSendData
- description 107-109
- example 109
- overview 55-56
- summary 85
- NMS_GR303ProvisionInterface
- description 110-113
- example 114
- overview 54
- summary 85
- NMS_GR303ResetChannelStatistics
- description 115-116
- example 116
- overview 55, 57
- summary 86
- NMS_GR303ResetDS1Status
- description 117-118
- example 118
- overview 54-55, 57
- summary 86
- NMS_GR303SetTrace
- description 119-122
- example 122
- overview 54
- summary 84
- NMS_GR303StartInterface
- description 123
- example 124
- overview 54-55
- summary 85
- NMS_GR303StopInterface
- description 125
- example 126
- overview 56-58
- summary 85
- NMS_V5_BOARD_FAMILY_T 217
- NMS_V5_CHANNEL_LOCATION_T 218
- NMS_V5_CHANNEL_STATISTICS_T 220-221
- NMS_V5_E1_LOCATION_T 217
- NMS_V5_E1_STATUS_T 219-220
- NMS_V5AddE1
- description 127-128
- example 128
- overview 70
- summary 87
- NMS_V5DeleteE1
- description 129-130
- example 130
- overview 70
- summary 87
- NMS_V5DestroyInterface
- description 131
- example 132
- overview 72-73
- summary 85, 87
- NMS_V5DestroyStandByVariant
- description 133
- example 133
- overview 73
- summary 87
- NMS_V5Exit
- description 134
- example 134
- overview 73
- summary 87
- NMS_V5GetChannelStatistics
- description 135-137
- example 137
- overview 72
- summary 88
- NMS_V5GetE1Status
- description 139-141
- example 141
- overview 68, 71-72
- summary 88
- NMS_V5Initialize
- description 142-143
- example 143
- overview 68
- summary 87
- NMS_V5PhSendData
- description 144-145
- example 146
- overview 71
- summary 88
- NMS_V5ProvisionInterface
- description 147-151
- example 153
- overview 68
- summary 87
- NMS_V5ProvisionStandByVariant
- description 154-159
- example 160
- overview 70
- summary 87
- NMS_V5ResetChannelStatistics
- description 161-162
- example 162
- overview 72
- summary 88
- NMS_V5ResetE1Status
- description 163
- example 164
- overview 71-72
- summary 88
- NMS_V5SendSA7Bit
- description 165-166
- example 166
- overview 71
- summary 88
- NMS_V5SetTrace
- description 167-170
- example 170
- overview 68
- summary 87
- NMS_V5StartInterface
- description 171
- example 172
- overview 69
- summary 88
- NMS_V5StopInterface
- description 173
- example 174
- overview 72-73
- summary 88
- NMS_V5SwitchOverVariantData
- description 175
- example 176
- overview 70
- summary 87
- nms303tool
- building the executable 15, 179
- compiling as a standalone program 180
- compiling as an integrated program 180
- component 12
- overview 17
- running in integrated mode 185-189
- running in standalone mode 181-184
- testing and troubleshooting 40
- using source code 45
- verifying system integration 43
- nmsv5tool
- building the executable 15, 179
- compiling as a standalone program 180
- compiling as an integrated program 180
- component 12
- overview 17
- running in integrated mode 195-198
- running in standalone mode 190-194
- testing and troubleshooting 40
- using source code 50
- verifying system integration 49
- NSM GR303
- use with Aztek GR-303 stack functions 60-64
O
- OAM. See NMS OAM
- oamcfg 24
- oammon 24
- oamsys 24, 32, 34
- ones density 232
- Operations, Administration, and Maintenance. See NMS OAM
P
- PBX 18
- pciscan 34
- Platform Support for DLCP 10-12, 26-27
- provisioning a standby variant 154-159
- provisioning a V5.2 interface standby variant 70
- provisioning an interface
- NMS GR303 54, 110-113
- NMS V5 68, 147-152
- PSTN 18
- Pulsed E&M 225
R
- RDT applications
- and Access303 13
- and NMS GR303 12
- application development 15
- building the application 45
- defined 18
- integrating the system 41-45
- Remote Digital Terminal applications. See RDT applications
- re-provisioning an interface
- NMS GR303 56
- NMS V5 72
- retrieving channel statistics
- NMS GR303 55, 57, 94-96
- NMS V5 72, 135-137
- retrieving link status information
- NMS GR303 and T1 links 54-55, 98-100
- NMS V5 and E1 links 71-72, 139-141
- robbed-bit signaling 225, 228-229
- runtime software 25
S
- SA7
- framing 68, 71
- setting the E1 framing bit 71, 165
- sending data to provisioned channels
- NMS GR303 56, 107-109
- NMS V5 71, 144-145
- setting the SA7 framing bit (NMS V5) 71
- signaling bits 225
- standby variants
- destroying 70, 133
- provisioning 70, 154-159
- switching over to 70, 175
- starting an interface
- NMS GR303 55, 123
- NMS V5 69, 171
- state diagram
- NMS GR303 59-60
- NMS V5 74-75
- statistics. See HDLC
- status information. See E1 or T1
- StatusMask 99
- stopping an interface
- NMS GR303 56-57, 125
- NMS V5 72-73, 173
- stopping and starting without re-provisioning
- NMS GR303 and Aztek GR-303 stack 62
- NMS V5 and AV5 functions 77
- stopping, re-provisioning, and restarting
- NMS GR303 and Aztek GR-303 stack 63
- NMS V5 and AV5 functions 78
- superframe 228
- SWI service 23
- switching to a standby variant
- AN initiated 80
- LE initiated 81
- NMS V5 functions 70
- system integration
- aim303 44
- aimv5 49
- nms303tool 43
- nmsv5tool 49
- setting board and trunk locations for GR-303 42
- setting board and trunk locations for V5.2 47-48
- setting common GR-303 data types 41
- setting common V5.2 data types 46-47
- testing the GR-303 integration 44
- testing the V5.2 integration 44, 50
- verifying E1 connections 48-49
- verifying T1 connections 43
- verifying the GR-303 integration 43-44
- verifying the V5.2 integration 48-50
T
- T1
- alarm indication 99
- CAS protocols 225
- defined 17
- framing 226-229
- loss of frame 99
- loss of signal 99
- remote alarm indication 99
- retrieving T1 link status information 98-100
- transmission rate 224
- TCPs. See Trunk Control Programs
- time-division multiplexing 226
- TMC 18
- tracing
- See also callback functions
- NMS GR303 trace messages 121
- NMS V5 trace messages 169
- setting trace levels for NMS GR303 54, 119-122
- setting trace levels for NMS V5 68, 167-170
- Trunk Control Programs (TCPs) 26
- trunkmon 43, 48-49
V
- V5.2 protocol
- See also AV5
- See also NMS V5
- described 28-29
- features 14
- overview 14
Z
- zero code suppression 232
Version
Want to send us feedback on our documentation? Email: Tech_Pubs@nmss.com
Copyright © 2001, NMS Communications Corporation. All rights
reserved.