(Page 45 of 46 in this chapter)
Version
ACU_USER_INFO_IN
Purpose
Indicate user-to-user information.
Note:
This primitive is only implemented on the TE side (such as if your partner equipment equals
EQUIPMENT_NT
).
Conn_id
An allocated call.
Macro
Description
Q.931 IE
4ESS
E10
N12
DMS100
ETSI
VN6
HKG
AUSTEL1
NTT
KOREA
TAIWAN
QSIG
Acu_user_info_a_ext_parms
Pointer to buffer containing extended parameters.
(Not used.)
Acu_user_info_a_fac, Acu_user_info_fac_size
User facility information.
Facility
x
x
x
Acu_user_info_a_q931, Acu_user_info_q931_size
Pointer to (and size of) buffer containing raw data of incoming Q.931 message.
(Does not map to an IE.)
x
x
x
x
x
x
Acu_user_info_a_uui, Acu_user_info_uui_size
Pointer to (and size of) ISDN user-to-user information (optional).
User-User
x
x
x
x
x
Acu_user_info_ext_parms_lgth
Total length of buffer containing extended parameters.
(Not used.)
Acu_user_info_ext_parms_nb
Number of parameters in buffer containing extended parameters.
(Not used.)
Acu_user_info_fac_protocol_discr
User facility protocol discriminator.
(Not used.)
Acu_user_info_uui_protocol
UUI protocol discriminator value. (See
Section 8.3.8
for a list of valid values.)
User-User
x
x
x
x
(Page 45 of 46 in this chapter)
Version
Want to send us feedback on our documentation? Email:
Tech_Pubs@nmss.com
Copyright © 2001, Natural MicroSystems, Inc. All rights reserved.
(Page 45 of 46 in this chapter) Version (Page 45 of 46 in this chapter) Version