(Page 8 of 11 in this chapter)
5.7 Special Commands
There are two special commands available to the AG Connect board:
Command
Description
QUERY_TIMESLOT
Returns the type of line interface associated with a specified timeslot.
CONFIG_GAIN
Sets the gain coming from the line at a line interface. (Applicable to boards with conferencing capability only)
These commands are described in detail in the following sections.
5.7.1 The CxDriverCommand Function
To invoke these commands, use the
CxDriverCommand
function. Pass the command name and appropriate parameters to this function.
The following is the syntax of the
CxDriverCommand
function:
(Page 8 of 11 in this chapter)
Tech_Support@nmss.com
Copyright © 1996, Natural MicroSystems, Inc. All rights reserved.
(Page 8 of 11 in this chapter) (Page 8 of 11 in this chapter)