(Page 4 of 5 in this chapter)

2.3 CT Access 1.0

In CT Access version 1.0, the following services are available: Service Provides functions for... Switching Controlling MVIP switch blocks on telephony boards Voice Message Playing, recording and editing voice messages ADI Interfacing with AG boards
Figure 8. CT Access 1.0 Functionality

Service	Provides functions for...
Switching	Controlling MVIP switch blocks on telephony boards
Voice Message	Playing, recording and editing voice messages
ADI	Interfacing with AG boards

2.3.1 Switching Service

Service:

SWI

Service Manager:

SWIMGR

Service ID:

0x0004

Hardware:

Any board with an MVIP-90 or MVIP-95 switching driver.

Service:	SWI
Service Manager:	SWIMGR
Service ID:	0x0004
Hardware:	Any board with an MVIP-90 or MVIP-95 switching driver.

The Switching service provides functions for controlling MVIP switch blocks. See Chapter 4 for details of the Switching Service.

Service:	VCE
Service Manager:	VCEMGR
Service ID:	0x0003
Hardware:	Any board supporting a Player/Recorder service.

The Voice Message service provides a set of functions for playing, recording, and editing voice messages. The Voice Message service is an integration service which uses a Player/Recorder device service to interface to the hardware. Refer to Chapter 5 for details of the Voice Message service. Note: For CT Access 1.0, the ADI service provides the Player/Recorder functionality for the Voice Message service.

Service:	ADI
Service Manager:	ADIMGR
Service ID:	0x0001
Hardware:	Natural MicroSystems AG boards.

The ADI Service provides device level telephony services for CT Access 1.0.
The ADI Service is comprised of the following functionality: Call Control Playing/Recording Call Progress Tone Detection Tone Generation DTMF Collection Energy Detector, FSK data, and timers
See Chapter 6 - Chapter 12 for details on the ADI service. Note: The application programming interface (API) provided for the ADI service is specific to Natural MicroSystems AG boards.

(Page 4 of 5 in this chapter)