(Page 1 of 1 in this chapter)

About This Manual

The AGM Library can be used to create utility programs for the NMS Alliance Generation family of hardware. The AGM Library Developer's Reference Manual explains how to use the AGM Library functions to perform the following tasks on one or more AG boards: Load software and firmware Configure and boot hardware Retrieve status information from hardware
This manual is targeted to developers of telephony and voice applications who are using the Alliance Generation (AG) family of telephony boards with CT Access. This document defines telephony terms where applicable, but assumes that the reader is familiar with telephony concepts. It also assumes that the user is familiar with the C programming language.
This manual is organized as follows: For... See... Information about the AGM Library and its features Chapter 1 - About the AGM Library Information about basic operations that can be performed by an application using the AGM library Chapter 2 - Using the AGM Library A reference to functions in the AGM library Chapter 3 - Function Reference

For...	See...
Information about the AGM Library and its features	Chapter 1 - About the AGM Library
Information about basic operations that can be performed by an application using the AGM library	Chapter 2 - Using the AGM Library
A reference to functions in the AGM library	Chapter 3 - Function Reference

Related Documents

For more information, refer to the following manuals: This manual... Provides... CT Access Developer's Reference Manual An overview of CT Access and a reference of functions, events, reason codes, and errors. CT Access Migration Manual Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath. CT Access Installation Manual Instructions for installing the CT Access software and its configuration files. It also provides a procedure for verifying the installation. AG Runtime Configuration and Developer's Manual Information about the AG configuration file, agmon, AG board and driver error messages, and AG task processors.
The following manuals provide an overview of the capabilities and functions of the services that use CT Access: ADI Service Developer's Manual ADI Service Function ReferenceManual Switching Service Developer's ReferenceManual Voice Message Service Developer's ReferenceManual T1/E1 Digital Trunk Monitor Service Developer's Reference Manual

This manual...	Provides...
CT Access Developer's Reference Manual	An overview of CT Access and a reference of functions, events, reason codes, and errors.
CT Access Migration Manual	Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath.
CT Access Installation Manual	Instructions for installing the CT Access software and its configuration files. It also provides a procedure for verifying the installation.
AG Runtime Configuration and Developer's Manual	Information about the AG configuration file, `agmon`, AG board and driver error messages, and AG task processors.

(Page 1 of 1 in this chapter)