(Page 1 of 1 in this chapter)

Appendix F

NaturalFax DSP Requirements

NaturalFax DSP Requirements

NaturalFax provides sample AG configuration files that support several common fax and voice applications on AG boards. If your application requirements are different, you may need to adjust your configuration, or run fewer ports of voice and fax functions.
The following table provides the MIPS requirements for the NaturalFax DSP files. Use this information and the information provided by the AG Runtime Configuration and Developer's Manual to determine the MIPS requirements for your application. Chapter 3 of this manual provides detailed information about configuring the AG hardware in your system for optimal application performance.
It is important to test your application with the expected AG hardware configuration, combination of functions, and number of active ports. This load testing will confirm that sufficient DSP resources exist to handle your application in the field. File Purpose MIPS Related API Functions Related Parameters m4r_300.dsp, m4r_300a.dsp V.21 modem receiver 2.80 nfxSendFax, or nfxReceiveFax, or nfxAnswerFaxPoll None. m4x_300.dsp, m4x_300a.dsp V.21 modem transmitter 1.50 nfxSendFax, or nfxReceiveFax, or nfxAnswerFaxPoll None. m4r_samp.dsp, m4r_sampa.dsp V.27 and V.29 modem receivers (1st part) 2.15 nfxReceiveFax at 9600, 7200, 4800, or 2400 NFX_RECEIVE_PARMS.modemtype = NFX_MODEM_TYPE_V29 or NFX_MODEM_TYPE_V27 m4r_baud.dsp V.27 and V.29 modem receivers (2nd part) 3.21 nfxReceiveFax at 9600, 7200, 4800, or 2400 NFX_RECEIVE_PARMS.modemtype = NFX_MODEM_TYPE_V29 or NFX_MODEM_TYPE_V27 m4x_tx.dsp, m4x_txa.dsp V.27 and V.29 modem transmitters 3.30 nfxSendFax, or nfxAnswerFaxPoll at 9600, 7200, 4800, or 2400 NFX_TRANSMIT_PARMS.modemtype = NFX_MODEM_TYPE_V29 or NFX_MODEM_TYPE_V27 m4x_17.dsp, m4x_17a.dsp V.17 modem transmitters 3.40 nfxSendFax, or nfxAnswerFaxPoll at 14.4 kbps NFX_TRANSMIT_PARMS.modemtype = NFX_MODEM_TYPE_V17

File	Purpose	MIPS	Related API Functions	Related Parameters
`m4r_300.dsp, m4r_300a.dsp`	V.21 modem receiver	2.80	`nfxSendFax`, or `nfxReceiveFax`, or `nfxAnswerFaxPoll`	None.
`m4x_300.dsp, m4x_300a.dsp`	V.21 modem transmitter	1.50	`nfxSendFax`, or `nfxReceiveFax`, or `nfxAnswerFaxPoll`	None.
`m4r_samp.dsp, m4r_sampa.dsp`	V.27 and V.29 modem receivers (1st part)	2.15	`nfxReceiveFax` at 9600, 7200, 4800, or 2400	`NFX_RECEIVE_PARMS.modemtype = NFX_MODEM_TYPE_V29` or `NFX_MODEM_TYPE_V27`
`m4r_baud.dsp`	V.27 and V.29 modem receivers (2nd part)	3.21	`nfxReceiveFax` at 9600, 7200, 4800, or 2400	`NFX_RECEIVE_PARMS.modemtype = NFX_MODEM_TYPE_V29` or `NFX_MODEM_TYPE_V27`
`m4x_tx.dsp, m4x_txa.dsp`	V.27 and V.29 modem transmitters	3.30	`nfxSendFax`, or `nfxAnswerFaxPoll` at 9600, 7200, 4800, or 2400	`NFX_TRANSMIT_PARMS.modemtype = NFX_MODEM_TYPE_V29` or `NFX_MODEM_TYPE_V27`
`m4x_17.dsp, m4x_17a.dsp`	V.17 modem transmitters	3.40	`nfxSendFax`, or `nfxAnswerFaxPoll` at 14.4 kbps	`NFX_TRANSMIT_PARMS.modemtype = NFX_MODEM_TYPE_V17`

(Page 1 of 1 in this chapter)

tech_support@nmss.com