(Page 1 of 2 in this chapter)
About This Manual
The
Fusion Developer's Manual
describes tools in the Fusion Software Development Kit and how to use them to build IP telephony gateway applications.
The manual is targeted to programmers and systems integrators who develop IP telephony gateway applications. The manual assumes readers are familiar with basic telephony and Internet data communication concepts, as well as the C programming language.
The
Fusion Developer's Manual
is organized as follows:
For...
See...
An introduction to IP telephony gateways and a
description of the Fusion product
Chapter 1 -
Introduction
An overview of the Fusion gateway application
architecture
Chapter 2 -
Application Architecture
An introduction to the CT Access and TX Series APIs used by Fusion gateway applications
Chapter 3 -
Fusion API Summary
Information about controlling PSTN connections with the AG hardware and CT Access services
Chapter 4 - PSTN Interface Control
Information about controlling Internet connections with the TX Series APIs
Chapter 5 -
Packet Network Interface Control
A description of the Fusion demonstration programs
Chapter 6 -
Demonstration Programs
A glossary of relevant terms
Appendix A
- Glossary
Instructions for setting up switching for Fusion systems
Appendix B
- Switching Diagrams
(Page 1 of 2 in this chapter)
tech_support@nmss.com
Copyright © 1998, Natural MicroSystems, Inc. All rights reserved.
(Page 1 of 2 in this chapter) (Page 1 of 2 in this chapter)