(Page 1 of 1 in this chapter)

About This Manual

The AG-24/30/48/60 Installation and Developer's Manual explains how to configure and install AG-24/30/48/60 boards, and how to verify that the board(s) has been installed correctly and is operating correctly. It also provides some general information about developing an application with these telephony boards in the CT Access development environment.
This manual is targeted to developers of telephony and voice applications who are using AG-24/30/48/60 boards with CT Access. This document defines telephony terms where applicable, but assumes that the reader is familiar with telephony concepts and switching.
This manual is organized as follows: For... See... An overview of the AG-24/30/48/60 and related software components, and a summary of the steps in the installation process Chapter 1 - About the AG-24/30/48/60 Boards Instructions on configuring the hardware and installing it in your computer Chapter 2 - Installing the Hardware Instructions for editing your AG configuration file so it properly reflects your setup Chapter 3 - The AG Configuration File Verification procedures to check your installation Chapter 4 - Verifying the Installation Glossary of terms Appendix A - Glossary Specifications of the AG-24/30/48/60 hardware Appendix B - Hardware Specifications

For...	See...
An overview of the AG-24/30/48/60 and related software components, and a summary of the steps in the installation process	Chapter 1 - About the AG-24/30/48/60 Boards
Instructions on configuring the hardware and installing it in your computer	Chapter 2 - Installing the Hardware
Instructions for editing your AG configuration file so it properly reflects your setup	Chapter 3 - The AG Configuration File
Verification procedures to check your installation	Chapter 4 - Verifying the Installation
Glossary of terms	Appendix A - Glossary
Specifications of the AG-24/30/48/60 hardware	Appendix B - Hardware Specifications

Related Documents

For more information about the CT Access software development environment, refer to the following manuals: This manual... Provides... Natural Access installation booklet Information about installing Natural Access from CD-ROM. CT Access Developer's Reference Manual An overview of CT Access and a reference of functions, events, reason codes, and errors. CT Access Migration Manual Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath. CT Access Installation Manual Instructions for installing the CT Access development environment, including the ADI service, the Switching service, the Voice Message service, the Point-to-Point Switching service, and various utilities. It also provides a procedure for verifying your installation. AG Runtime Configuration and Developer's Manual Information about the AG configuration file, agmon, AG board and driver error messages, and AG task processors. Getting Started With MVIP Switching An overview of MVIP-90 and MVIP-95 switching.
The following manuals provide an overview of the capabilities and functions of the services that use CT Access: ADI Service Developer's Manual ADI Service Function Reference Manual Switching Service Developer's Reference Manual Point-to-Point Switching Service Developer's Reference Manual Voice Message Service Developer's Reference Manual

This manual...	Provides...
Natural Access installation booklet	Information about installing Natural Access from CD-ROM.
CT Access Developer's Reference Manual	An overview of CT Access and a reference of functions, events, reason codes, and errors.
CT Access Migration Manual	Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath.
CT Access Installation Manual	Instructions for installing the CT Access development environment, including the ADI service, the Switching service, the Voice Message service, the Point-to-Point Switching service, and various utilities. It also provides a procedure for verifying your installation.
AG Runtime Configuration and Developer's Manual	Information about the AG configuration file, `agmon`, AG board and driver error messages, and AG task processors.
Getting Started With MVIP Switching	An overview of MVIP-90 and MVIP-95 switching.

(Page 1 of 1 in this chapter)