(Page 6 of 9 in this chapter)

8.5 Obtaining and Configuring Stream Speed Information

The following functions allow you to obtain and control the speed of an H.100 stream on an H.100 bus:

Function

 Description

swiConfigStreamSpeed

 Configures the speed of one or more streams of the H.100 bus.

swiGetStreamsBySpeed

 Identifies all H.100 streams operating at one specified speed.

Refer to Section 6.2, Stream Speed Configuration for more information.


(Page 6 of 9 in this chapter)

tech_support@nmss.com
Copyright © 1997, Natural MicroSystems, Inc. All rights reserved.