(Page 9 of 9 in this chapter)
8.8 Performing Miscellaneous Switching Functions
The following additional miscellaneous functions are available in the Switching service:
Function
Description
swiDisableSwitch
Disables the switch block with respect to the MVIP bus.
swiEnableSwitch
Enables the switch block with respect to the MVIP bus.
swiSetVerify
Enables or disables command-by-command verification of switching functions.
Refer to
Section 7.2,
Verifying Switching Operations
for more information.
(Page 9 of 9 in this chapter)
tech_support@nmss.com
Copyright © 1997, Natural MicroSystems, Inc. All rights reserved.
(Page 9 of 9 in this chapter)