(Page 1 of 2 in this chapter)
About This Manual
The
Switching Service Developer's Reference Manual
provides:
An overview of the CT Access Switching service
A reference of functions and errors
This manual defines telephony terms where applicable, but assumes that the reader is familiar with telephony concepts and switching. It also assumes that the user is familiar with the C programming language.
Read the
CT Access Developer's Reference Manual
before using this manual. The
CT Access Developer's Reference Manual
contains detailed information concerning CT Access concepts, architecture, and application development. This information must be fully understood before you develop a switching application using CT Access.
This manual is organized as follows:
For...
See...
An overview of CT Access
Chapter 1
- Overview of CT Access
Information about the Switching service
Chapter 2
- Overview of the Switching Service
An explanation of opening and closing switch handles
Chapter 3
- Opening and Closing Switch Handles
Information about controlling the underlying MVIP switching device
Chapter 4
- Establishing MVIP Switching
Information about controlling the clocks on the underlying MVIP switching device
Chapter 5
- Configuring the Clocks
Information about stream speed configuration and board and driver configurations
Chapter 6
- Other Configurations
Information about diagnostic functions and utility functions in the Switching service
Chapter 7
- Miscellaneous Functions
An overview of the Switching service functions by task
Chapter 8
- Function Summary
An alphabetical list and detailed information of the Switching service functions
Chapter 9
- Alphabetical Function Reference
Information about the
drpinst
and
prt2prt
demonstration programs, and the
swish
and
showcx95
utilities
Chapter 10
- Demonstration Programs and Utilities
Terms used in CT Access
Appendix A
- Glossary
A list of Switching service errors and their descriptions
Appendix B
- Error Summary
An example of developing a Call Center application using the Switching service functions
Appendix C
- Switching Application Example
(Page 1 of 2 in this chapter)
tech_support@nmss.com
Copyright © 1997, Natural MicroSystems, Inc. All rights reserved.