(Page 1 of 1 in this chapter)

About This Manual

The Point-to-Point Switching Service Developer's Reference Manual provides: An overview of the CT Access Point-to-Point Switching service A reference of its functions and errors
This manual defines telephony terms where applicable, but assumes that the reader is familiar with telephony and switching concepts. It also assumes that the user is familiar with the C programming language.
Read the CT Access Developer's Reference Manual before using this manual. The CT Access Developer's Reference Manual contains detailed information about CT Access concepts, architecture, and application development. This information must be fully understood before you develop a switching application using CT Access.
This manual is organized as follows: For... See... An overview of Point-to-Point switching and CT Access Chapter 1 - Introduction Information about how to use the Point-to-Point Switching service Chapter 2 - Using Point-to-Point Switching Defining the switch configuration for your system Chapter 3 - Specifying the Switch Configuration A summary of the Point-to-Point Switching functions Chapter 4 - Function Summary Detailed information of the Point-to-Point Switching service functions Chapter 5 - Alphabetical Function Reference Information about the callcntr and brd2brd demonstration programs and the swish utility Chapter 6 - Demonstration Programs and Utilities Terms used in CT Access and the Point-to-Point Switching service Appendix A - Glossary A reference of Point-to-Point Switching service errors and events Appendix B - Errors and Events Sample Point-to-Point Switching configuration files for NMS boards Appendix C - Sample PPX Configuration Files A detailed definition of the Point-to-Point Switching configuration file statements Appendix D - PPX Configuration File Syntax

For...	See...
An overview of Point-to-Point switching and CT Access	Chapter 1 - Introduction
Information about how to use the Point-to-Point Switching service	Chapter 2 - Using Point-to-Point Switching
Defining the switch configuration for your system	Chapter 3 - Specifying the Switch Configuration
A summary of the Point-to-Point Switching functions	Chapter 4 - Function Summary
Detailed information of the Point-to-Point Switching service functions	Chapter 5 - Alphabetical Function Reference
Information about the `callcntr` and `brd2brd` demonstration programs and the `swish` utility	Chapter 6 - Demonstration Programs and Utilities
Terms used in CT Access and the Point-to-Point Switching service	Appendix A - Glossary
A reference of Point-to-Point Switching service errors and events	Appendix B - Errors and Events
Sample Point-to-Point Switching configuration files for NMS boards	Appendix C - Sample PPX Configuration Files
A detailed definition of the Point-to-Point Switching configuration file statements	Appendix D - PPX Configuration File Syntax

Related Documents

For more information, refer to the following manuals: This manual... Provides... CT Access Developer's Reference Manual An overview of CT Access and a reference of functions, events, reason codes, and errors. CT Access Migration Manual Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath. CT Access Installation Manual A description of the software installation and a procedure for verifying your installation. Switching Service Developer's Reference Manual An overview of the CT Access Switching service and a reference of functions, events, reason codes, and errors. Getting Started With MVIP Switching An overview of MVIP-90 and MVIP-95 switching. AG Runtime Configuration and Developer's Manual Information about the AG configuration file, agmon, AG board and driver error messages, and AG task processors. MC1 Installation & Developer's Manual Information on how to install and configure an MC1 board. Multi-Vendor Integration Protocol Reference Information about MVIP-90. MVIP-95 Device Driver Standard Information about MVIP-95.
The following manuals provide an overview of the capabilities and functions of the services that use CT Access: ADI Service Developer's Manual ADI Service Function Reference Manual Voice Message Service Developer's Reference Manual T1/E1 Digital Trunk Monitor Service Developer's Reference Manual
For GO-MVIP information, please contact: GO-MVIP, Inc. 3220 N Street, NW, Suite 360 Washington, DC 20007 Tel: 800-NOW-MVIP (US and Canada) Tel: 903-769-3717; Fax: 903-769-3818 Email: info@mvip.org

This manual...	Provides...
CT Access Developer's Reference Manual	An overview of CT Access and a reference of functions, events, reason codes, and errors.
CT Access Migration Manual	Instructions on migrating to CT Access from ME/2/X, AG Access, MVIP-90, and SwitchPath.
CT Access Installation Manual	A description of the software installation and a procedure for verifying your installation.
Switching Service Developer's Reference Manual	An overview of the CT Access Switching service and a reference of functions, events, reason codes, and errors.
Getting Started With MVIP Switching	An overview of MVIP-90 and MVIP-95 switching.
AG Runtime Configuration and Developer's Manual	Information about the AG configuration file, `agmon`, AG board and driver error messages, and AG task processors.
MC1 Installation & Developer's Manual	Information on how to install and configure an MC1 board.
Multi-Vendor Integration Protocol Reference	Information about MVIP-90.
MVIP-95 Device Driver Standard	Information about MVIP-95.

(Page 1 of 1 in this chapter)

tech_support@nmss.com