(Page 21 of 26 in this chapter)
cpi_pre_boot
Description
- Loads a small program into the TX Series board indicated by handle.
Prototype
- #include <txcpi.h>
- short cpi_pre_boot (TX_HANDLE handle,
- char *buffer,
- short len,
- unsigned short off,
- short xqt)
Return Values
Details
- The parameter buffer contains a pointer to a segment of the load image of length len. The parameter off should be set to where to copy the code and xqt != 0 indicates that the prebooter should execute after the copy of the code into the CP is completed.
(Page 21 of 26 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights
reserved.