(Page 14 of 46 in this chapter)

ConnectMode

Specifies the HMIC switch CONNECT mode. This statement is used for configurations that transfer non-voice data in multiple timeslots (for example, HDLC in TDM).
When ConnectMode = FRAMED, the HMIC is put into the FRAMED_CONNECT mode. In FRAMED_CONNECT mode, all connection commands, with either CONNECT or FRAMED_CONNECT mode, are automatically changed to FRAMED_CONNECT mode, and return SUCCESS when connections are made.
When ConnectMode = UNFRAMED, the HMIC is put CONNECT mode, and all connection commands with FRAMED_CONNECT mode are rejected and returned with error. Commands with CONNECT mode return SUCCESS if connections are made.

(Page 14 of 46 in this chapter)