(Page 30 of 46 in this chapter)
LineType
Syntax
LineType[line [..endline]] = LOOPSTART | LOOP | E&M | E&M1A | DID
Description
- This statement configures one or more analog telephone line interfaces on an AG-8. If no line number is specified, the statement applies to all line interfaces.
- Each line interface device has a default line type: the default for the LS interface is
LOOPSTART and the default for the DID/E&M interface is DID.
Example
LineType = LOOP # Configures all 8 lines
# as loop start lines
LineType 0..7 = E&M # Configures lines 0-7
# as E&M lines
(Page 30 of 46 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights
reserved.