(Page 32 of 46 in this chapter)

MaxChannels

Syntax

MaxChannels = numchannels

Description

This specifies the maximum number of channels to allocate on the board. The number of channels affects memory requirements. If Buffers is not configured, then 2 buffers are allocated per channel.If this statement is omitted, agmon assigns an appropriate value for the board type.
The MaxChannels statement is required in ISDN configurations. Note: The maximum number of channels per board is also limited by the run file and in the host driver.

Example

MaxChannels = 60

(Page 32 of 46 in this chapter)

tech_support@nmss.com

Copyright © 1999, Natural MicroSystems, Inc. All rights reserved.