(Page 36 of 46 in this chapter)
NFAS_Group
Syntax
NFAS_Group=group_no
Description
- Sets up NFAS groups and assigns a trunk to an NFAS group. To assign a trunk to a group, include the
NFAS_Group statement in the Trunk section specifying the trunk in the AG configuration file. For more information about NFAS groups, see the AG ISDN Installation Manual.
- The statement is required for NFAS configurations.
Example
NFAS_Group=1
See Also
NAI
(Page 36 of 46 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights
reserved.