(Page 41 of 46 in this chapter)
RunFile
Syntax
RunFile = filename
Description
- Specifies the runtime software to be transferred to the board by agmon. For AG 2000 boards and AG 4000 boards, the
RunFile is the core file which is used with module extension files (specified by the RunModule statement).
- The following are examples of run files:
- sysan.run, for an analog board (AG-8)
- systn.run, for a digital board (AG-T1, AG-E1)
- sysqn.run, for channel associated signaling (AG Quad,
CompactPCI AG Quad)
- ag2000.cor, a AG 2000 board
- ag4000.cor, a AG 4000 board
- The
RunFile statement is mandatory for all boards except AG 2000 and boards AG 4000 boards.
Example
- Windows NT:
RunFile = c:\nms\ag\load\sysdn.run
RunFile = sysdn.run
UnixWare and Solaris:
RunFile = /opt/nms/ag/load/sysdn.run
RunFile = sysdn.run
See Also
RunModule
(Page 41 of 46 in this chapter)
tech_support@nmss.com
Copyright © 1999, Natural MicroSystems, Inc. All rights
reserved.